News

GURUCAD AEROSPACE DIVISION

BREAKING THE KNOWLEDGE LIMITS IN AEROSPACE INDUSTRY


8-10 April 2014
We kindly invite you to visit us and enjoy exchanging innovative ideas at Aircraft Interiors Expo 2014 in Hamburg between 8-10 April 2014. Situated in Hall B1 Stand 1A38, GURUCAD will showcase innovative products / solutions / concepts / workshops for Aerospace Industry.

Aircraft Interiors Expo 2014

For the fourth time at Aircraft Interiors Expo, GURUCAD will show new ways of working for Aerospace Industry, value-added solutions/products and present our competences in the area of design and stress analysis for Aerospace Industry.

As a short overview of our Agenda:
  • GURUCAD - Breaking The Knowledge Limits In Aerospace Industry
  • GURUCAD - Added-Value for our customers in Aerospace Industry
  • Transnational Projects Solution via our Off-Shore Office
  • Cabin Interior Engineering Services: Design & Stress (from concept to series)for Monuments (including galley, lavatory, closets, overhead bins and sidewall panels)
  • Airbus A350 Engineering Support from Hamburg for RSP‘s: SAM-B/C creation, 3D Models insertion in Airbus PDM, FAL Support, Installation Drawings, Manufacturing 3D Models and 2D Drawings creation, Interface Loads and Substantiation Reports
  • Fully Parametric Models in CATIA V5 for covering Product Families
  • Configuration and Product Data Management
  • Composite Design based on new CATIA V5 Grid Method for Primary Structure
  • Trainings for Aerospace Industry: CATIA V5, Nastran-Patran, Methods-Processes...
  • Q & A Sessions

July 2013
Delivery of 3D Models and Installation Drawings as Design Data Sets for PAX Cabin Interior Modules for Airbus A350XWB MSN5


Short overview of provided services:
  • Creation and release of SAM-B/SAM-C Models
  • Creation and release of Installation Drawings
  • CATIA V5 Detail Design (3D Models and 2D Drawings) for Manufacturing

January 2013
Delivery of 3D Models and Installation Drawings as Design Data Sets for PAX Cabin Interior Modules for Airbus A350XWB MSN2


Short overview of provided services:
  • Creation and release of SAM-B/SAM-C Models
  • Creation and release of Installation Drawings
  • CATIA V5 Detail Design (3D Models and 2D Drawings) for Manufacturing

27-29 March 2012
Visit us and enjoy exchanging innovative ideas at Aircraft Interiors Expo 2012 in Hamburg between 27 - 29 March 2012. We will be situated in Young Innovative German Companies Pavilion - Hall B7 Stand 7E6. GURUCAD will showcase innovative products / solutions / concepts for Aerospace Industry.

Aircraft Interiors Expo 2012

For the third time at Aircraft Interiors Expo, GURUCAD will show you new ways of working for Aerospace Industry, value-added solutions/products and present our competences in the area of design and stress analysis for Aerospace Industry.

As a short overview of our Agenda:
  • GURUCAD - Breaking The Knowledge Limits In Aerospace Industry
  • GURUCAD - Added-Value for our customers in Aerospace Industry
  • Transnational Projects Solution via our Off-Shore Office
  • Cabin Interior Engineering Services: Design & Stress (from concept to series)
  • Airbus A350 Engineering Support from Hamburg for RSP‘s: SAM-B/C creation, 3D Models insertion in Airbus PDM, FAL Support, Installation Drawings, Manufacturing 3D Models and 2D Drawings creation, Interface Loads and Substantiation Reports
  • Fully Parametric Models in CATIA V5 for covering Product Families
  • Composite Design based on new CATIA V5 Grid Method for Primary Structure
  • Trainings for Aerospace Industry: CATIA V5, Nastran-Patran, Methods-Processes...
  • Q & A Sessions

11 October 2011
Establishment of GURUCAD Bucharest / Romania, acting as an Off-Shore company offering lower rates and high quality engineering services by following the Quality Requirements from GURUCAD Germany. The Project Management and the Single Point of Contact (SPOC) for all Workpackages remains at GURUCAD Germany, this assure fast communication with the customers and also higher quality of project-deliverables.

GURUCAD-Office

For complete contact details please visit GURUCAD SRL Location page.

5 - 7 April 2011
Visit us at Aircraft Interiors Expo 2011 in Hamburg, we will be situated in Hall B4 Stand 4D10-G "Young Innovative German Companies Pavilion".

Aircraft Interiors Expo 2011

For the second time at Aircraft Interiors Expo, GURUCAD will showcase the GURUCAD V5 CABIN LAYOUT GENERATION solution together with Development, Design and Substantiation Services for Cabin Interior.

As a short overview of our Agenda:
  • GURUCAD - Breaking The Knowledge Limits In Aerospace Industry
  • GURUCAD V5 CABIN LAYOUT GENERATION solution nominated to Crystal Cabin Award 2010 in the Category Industrial Design/ Interior Concept
  • Development, Design and Substantiation Services for Cabin Interior
  • GURUCAD - Added-Value for our customers in Aerospace Industry
  • Q & A Sessions

9 February 2011
Starting the Development, Design and Substantiation of PAX Cabin Interior Modules for Airbus A350XWB Full-Flex Catalog


Short overview of provided services:
  • CATIA V5 Concept Design to answer Airbus HLPTS
  • Investigation and answer of JCR's
  • Creation of COMO's for different technical issues
  • Involvement in Interface Definition and Freeze Process
  • Final Assembly Line (FAL) Technical Review Meetings and V & V Sessions (PMU and Cabin 0)
  • Creation of Full-Flex Catalog Deliverables: 3D SAM-B/SAM-C Models, Module Assembly Drawings, Single Parts Drawings of Upper / Lower Attachments
  • Creation of Test Samples for Engineering, Static, Flamability, Altitude and Environmental Tests
  • Preparation of FEM-Models with Nastran-Patran / Hyperworks for static strength justification of cabin interior modules: FEM-Models set-up and run, Interface Loads Reports, Wind-Milling Reports...
  • Preparation of detailed FEM-Models with Nastran-Patran / Hyperworks for upper / lower attachments, Reinforcement Structure: FEM-Models set-up and run, Static Strength Justification Reports
  • Finding and implementing weight savings: optimization of structural items (Nastran SOL200 / Hyperworks Optistruct), new materials and manufacturing technologies, simplification of mechanical parts, use of alternative components for systems...
  • Working on GRESS Module 2 Documentation: Design/Product Verification Dossier, Supplier Module Specification (SMS), Interface Control Documents, FMEA, Weight Reports, Installation Instructions...
  • CATIA V5 Detail Design at Serial Production Maturity for Manufacturing (3D Models and Drawings)

30 November 2010
GURUCAD Quality Management System is certified by qm cert UG according to: DIN EN ISO 9001:2008 (Certificate Nr. 11-2104898610, valid until 28.11.2013) and DIN EN 9100:2003 (Certificate Nr. 11-6502402710, valid until 28.11.2013). GURUCAD QM

GURUCAD QM-Zertifikat 9001 Deutsch     GURUCAD QM-Zertifikat 9100 Deutsch

For more information please visit: GURUCAD Quality Management

18 - 20 May 2010
Visit us at Aircraft Interiors Expo 2010 in Hamburg, we will be situated at only few steps from AIRBUS Stand - Hall B7 Stand 7B36. GURUCAD will showcase innovative products / solutions / concepts / workshops for Aerospace Industry.

Aircraft Interiors Expo 2010

For the first time at Aircraft Interiors Expo, GURUCAD will show new ways of working for Aerospace Industry, value-added solutions/products and present our competences in the area of design and stress analysis for Aerospace Industry.

As a short overview of our Agenda:
  • GURUCAD - Breaking The Knowledge Limits In Aerospace Industry
  • GURUCAD Aerospace Solutions/Products
  • GURUCAD CABIN LAYOUT GENERATION
  • DMU Solutions for automated DMU Reviews
  • Innovative methods/processes for Aerospace Industry
  • GURUCAD - Added-Value for our customers in Aerospace Industry
  • Q & A Sessions

We will be situated in Hall B7, Stand 7B36, near AIRBUS (Hall B7 Floorplan).

We kindly invite you to visit us and enjoy exchanging innovative ideas in Aerospace Industry. The entrance is free and the expo will be open between 9:00 and 17:00 o'clock. For more information please visit: Aircraft Interiors Expo 2010 Web-Site

15 February 2010
GURUCAD V5 CABIN LAYOUT GENERATION nominated for CRYSTAL CABIN AWARD 2010 in the Category Industrial Design/ Interior Concept Crystal Cabin Award 2010 Shortlist

GURUCAD V5 CABIN LAYOUT GENERATION 2010 nominated for CRYSTAL CABIN AWARD 2010

We are happy to announce you that our solution - GURUCAD V5 CABIN LAYOUT GENERATION is nominated for CRYSTAL CABIN AWARD 2010 in the Category Industrial Design/ Interior Concept. This nomination proves the high level of innovation of our solution.

Lunched in 29 June 2009, GURUCAD V5 CABIN LAYOUT GENERATION it is an innovative solution for Aerospace Industry that standardize and radically improve the process of generating a cabin interior layout in CATIA V5, both in 3D and 2D.

For more information please visit our dedicated section to our GURUCAD V5 CABIN LAYOUT GENERATION solution.

16 November 2009
GURUCAD launch the AEROSPACE Division Website. Here you will find all GURUCAD competences, products, trainings and innovative concepts for Aerospace Industry.

Because of our huge competences build for Aerospace Industry and also because of our growing number of products/solutions, trainings and innovative concepts we decided to build a new web-site entirely dedicated to Aerospace Industry
Here you will get in touch with our competences in:
  • Aerospace Structure Area
  • Aerospace Systems Area
  • Aerospace Cabin Interior Area
  • Aerospace Cargo Area
  • Aerospace DMU Integration Area
  • Aerospace Jigs & Tools Area
  • Aerospace Manufacturing Area
but also with:

17 August 2009
GURUCAD launch innovative PLM-CAx Training & Education Services for several CAx Software, PLM Tools and Industries.

This suite of PLM-CAx Training & Education Services will helps companies get their engineering work-force faster prepared for successfully fulfilling engineering tasks. GURUCAD trainings portfolio cover: CAx Software Trainings (CATIA V5/V4, CATIA CADAM DRAFTING, Pro/ENGINEER, Unigraphics, SolidWorks, SolidEdge), PLM Tools and AEROSPACE Industry Trainings.
The key benefits for our customers will be:
  • trainers with long experience in the engineering field for several vertical industries
  • real-world practical examples for maximizing integration of CAx solution philosophy with theoretical real engineering concepts
  • possibility to customize the trainings to fit your company methods and engineering field
  • high flexibility of our trainers, they can support you also on-site
    GURUCAD PLM-CAx Training & Education Services

10 August 2009
GURUCAD launch a new innovative suite of services: "DESIGN TIME CUTTER". Achieve with smaller budget, better productivity, quality and standardisation in your organisation.

This suite of services will streamline companies processes in achieving with smaller budget, better productivity, quality and standardisation in their organisation.
  • small implementation time
  • capabilities to cover the entire engineering & design processes
  • budget reduction between 10-60%
  • GURUCAD fees are based on customer reduced budget (force us to streamline at maximum your processes)
  • support and service of the complete implemented framework of solutions will be provided by GURUCAD at no aditional costs
  • clean your organisation processes of gaps and wasted resources time in non-value tasks that can be automated
    DESIGN TIME CUTTER

29 June 2009
GURUCAD launch first CABIN LAYOUT GENERATION TOOL based on CATIA V5. Automaticaly generate an aircraft 2D and 3D Layout in CATIA V5.

This product is the first from a series dedicated to AEROSPACE Industry. GURUCAD is committed to innovate/improve/standardise the AEROSPACE processes dedicated to Engineering and Design. GURUCAD has developed the first CABIN LAYOUT GENERATION TOOL based on CATIA V5:
  • Automatically position the cabin components (Galleys, Lavatories, Seats, Hatracks...) in the aircraft, in CATIA V5 - 2D and 3D
  • Positioning of one component in the cabin is taking less than 1 second (CATIA V5 2D and 3D)
  • Possibility to customise/extend the application to work with any Cabin Interior Components
  • Rendering capabilities can be implemented for components families
  • All FAR, JAR requirements concerning cabin components can be integrated in this application
  • An XML file will be generated with all the positions of the cabin components so that the suppliers working with other CAD systems can use this information and automatically position their components (GURUCAD provide programming services for up to 7 CAD systems)
    GURUCAD CABIN LAYOUT GENERATION

1 October 2008
GURUCAD becomes "SECOND TIER SUPPLIER FOR EADS" (AIRBUS, EUROCOPTER, EADS ASTRIUM and all others EADS Subsidiaries).

2 April 2008
Establishment of GURUCAD GbR in Hamburg / Germany acting as a "THIRD TIER SUPPLIER FOR EADS" (AIRBUS, EUROCOPTER, EADS ASTRIUM and all others EADS Subsidiaries).

FLYERS:


GURUCAD AEROSPACE DIVISION


GURUCAD ENGINEERING & IT DIVISIONS

GURUCAD ENGINEERING

GURUCAD IT